Most major auto parts stores sell steering wheel covers, which can be installed with no special tools or knowledge. Below will tell you how to put on steering wheel cover, how to remove your steering wheel cover, the benefits of installing steering wheel covers, and FAQs.
So, how to put on steering wheel cover? Set the steering wheel straight and clean it, align the cover with the steering wheel, slip the top of the cover over the top of the steering wheel, slide the cover bit by bit into place, and check that the steering wheel cover is firmly in place.
Keep reading.
How to Put a Steering Wheel Cover On?
Here is an easy step-by-step guide:
Set the Steering Wheel Straight and Clean It
The steering wheel should be straight (12 o’clock position) before you begin.
It can be turned in any direction, of course, but doing it this way makes the subsequent step much simpler.
Then, clean the area of the wheel where your hands rest.
Wet wipes are a good substitute for a clean cloth or paper towel.
The cleaning is necessary because over time a thin and slippery layer of filth and grease forms on the grip surface.
If leftover, it can cause the steering wheel cover to lose grip and even slip while driving which is very dangerous.
Clean it as thoroughly as possible.
Align the Cover With the Steering Wheel
When you’re ready to finish the job, position the cover over the steering wheel as you want it to be.
Once you put it on, you’ll see that it fits so tightly that moving it is nearly impossible. Therefore, there is a good chance that you will need to repeat the entire process again if you don’t align it.
If there are grips on the cover, it may be best to place them at 10 and 2 o’clock, or wherever your hands will be resting most of the time while driving.
In any case, adjust it to your own safety and comfort as best you can.
Slip the Top of the Cover over the Top of the Steering Wheel
Place the top of the cover over the top of the wheel after aligning it.
The rest of the cover is slid into place using this as a starting point.
Of course, you can begin at the bottom or on a side, but starting at the top is simpler and more useful.
Slide the Cover Bit by Bit into Place
Even though you bought the right size, the cover will appear smaller once it is on the wheel.
Do not be alarmed; this is normal and intended to be so. It must fit very tightly for safety reasons, as was already mentioned.
Most people immediately try to stretch the cover from top to bottom and put it on that way. When you try it, you’ll see that it’s nearly impossible to ignore the risk of damaging the cover.
If you want to learn how to put a steering wheel cover on, you’ll have to have some patience.
It’s best to begin on one side. Hold the portion of the cover that is resting on top of the steering wheel in one hand.
Pull the wheel cover over gradually and carefully with your other hand.
Nearly half of the steering wheel should be within your range of motion on one side.
Once you do, switch hands and do the other side.
Once more, with one hand still holding the top, slowly slide the cover into place with the other.
You’ll see it slowly stretching and sliding into place.
If everything is done properly, the cover will sit in by the time you get to the bottom.
Check That the Steering Wheel Cover is Firmly in Place
Once done, grab the cover and spin the wheel completely while facing yourself in both directions.
Sort of „massage” the cover into place.
Make sure the cover fits properly by performing this step.
The steering wheel cover might have twisted a little bit during the process; by doing this, you straighten it and enable it to fit in properly.
The Benefits of Installing Steering Wheel Covers
- The steering wheel covers enhance the interior design of your car. especially if you choose a pattern that matches the upholstery on the seats or dashboard of your car.
- It should be possible to increase your grip on the steering wheel with a well-designed steering wheel cover.
- The steering wheel cover makes it simple to operate in some difficult circumstances that could otherwise harm the steering wheel.
- The steering wheel is protected by the steering wheel cover, which eliminates the need to replace the steering wheel because of wear and tear.
- The steering wheel cover will enable you to comfortably hold the steering wheel when it is vibrating due to some issues with the vehicle.
- Protection from harsh weather conditions that might affect the steering wheel.
How to Remove Your Steering Wheel Cover?
A dated steering cover might need to be taken off. You can remove the steering wheel cover on your steering wheel through the following procedure:
- You can attempt to exert sufficient force to take off the cover. You will be acting correctly if it begins to loosen up.
- Using a blow dryer is another method for accomplishing this. The cover will be heated in this way, becoming flexible and making removal simple.
FAQs
Do Steering Wheel Covers Protect the Steering Wheel?
Steering wheel covers enhance the interior’s beauty while shielding the steering wheel from deterioration. Additionally, it improves the quality of driving in general.
The use of steering wheel covers helps to prevent the steering wheels’ natural deterioration from everyday use. In place of the wheel itself, it deteriorates.
Are Steering Wheels Universal?
All aftermarket steering wheels are universal. Thus, they can be installed in any vehicle. One steering wheel can fit multiple vehicles, but it needs an adapter called a wheel hub or boss kit.
But not all aftermarket steering wheels are compatible with all vehicles. The “boss bolt” that secures the steering wheel and steering column differs significantly, which explains why this is the case. Check the dimensions and specifications to make sure the replacement will fit your current wheel before buying.
How Much Does It Cost to Replace a Steering Wheel Cover?
The price range for purchasing a steering wheel cover is $20 to $100. It won’t cost you a fortune to have a qualified mechanic fix it either. If you don’t know where to fix it, you can search for a steering wheel cover installation near me.
You can find all nearby installation facilities by using this keyword in a Google search. It can be installed by your nearby mechanic. The service fee for installing the steering wheel cover can range from $70 to $150, bringing the total to $90 to $250 including both parts and the service fee.
Should I Put a Cover on My Steering Wheel?
The driver can direct the movement of a car using the steering wheel. It connects to the suspension system through the steering column. The center of the steering wheel’s horn contact is fixed by automakers. It is crucial for optimum vehicle maneuverability.
Since it is so important for steering the car, it must be protected. Installing a steering wheel cover is also the best way to keep the steering wheel from getting damaged.
Aesthetic appeal is added to the interior of the car in addition to safeguarding the steering wheel from damage.
Why is It So Hard to Put on a Steering Wheel Cover?
A steering wheel cover’s installation may be as simple as ABC. This isn’t always the case, though. Remember that there are different diameters and circumference sizes available for steering wheels. While the circumference ranges from 2 to 5 inches, the diameter can be between 14 and 17 inches.
If you buy a smaller size, installing a steering wheel cover can be difficult and frightening. In other words, if the steering cover is not sufficiently stretchy to sufficiently cover the wheels.
Are Steering Wheel Knobs Illegal?
A majority of states forbid steering wheel knobs. There’s an exception for disabled drivers. State by state, and even county by county, there are variations in this law and its regulations. So, it is best to check your local law to see if it is legal in your area or not.
For drivers of commercial vehicles like dump trucks and semi-trucks, steering wheel knob spinners are acceptable.
In particular during a collision, steering wheel knobs hinder a vehicle’s quick response. They also interfere with proper road feedback. In some countries like the UK and some states in the United States, a driver will get state approval before installing it.
Summary: How to Put on Steering Wheel Cover?
To fit a steering wheel cover for your vehicle, you’ll have to measure your wheel first, then purchase the right sized cover. Once you find the appropriate cover for your car, you will either need to stretch it over the wheel or sew it together with a needle and thread.
If you have any questions, please leave a comment. KV Auto tries to give you the best car industry information. Thank you for reading.
Read about
